中文版 english
Current position: Home Page >> Genaral Product List >> Inspection Machine

Inspection Spreader KTJ-series


  Tire Inspection Spreader KTJ-series

 Tire Inspection Spreader KTJ-series

Function:
Tire inspection spreader is used to inspect the casing from inside to outside to evaluate the safety of the tyre and make the decision whether the tyre can be retreaded. Find and mark all visible and repairable defects on the acceptable tyres.

 Tire Inspection Spreader KTJ-series    Tire Inspection Spreader KTJ-series
   
There are various ways of tyre initial inspection, but it boils down into three ways: visual inspection, pressure testing inspection and non-destructive inspection (shearography). We apply the Inspection spreader/ tyre inspecter KTJ to The visual inspection, and Pressure Testing Machine CQJ to the pressure testing inspection.

Why do we need to inspect before retreading?
Tires are collected from various areas and each tyre's condition is different. To ensure the retreading quality of every tire, we must check the collected tires.

Tires are not acceptable if the following conditions happen:
1. Sidewall damage is beyond repair limits.
  

2. Bulges caused by separated or broken part of wires on the sidewall.
3. Wires of sidewall bruise breaks, contusion and blow outs, etc.
4. Bent, distorted, torn, burnt, broken, deformed and excessively senile beads.
5. Deep & rusty penetrated steel wire cuts which cause separation.
6. Ply separation, excessive damage and extremely large orifice around crown area.

OTR Tire Inspection Spreader
   


Specifications
:
 

Model

KTJ

Tire size range

7.50R16~12.00R20

Dimension(mm)

1600×1300×900

Electric machine power (KW)

0.55

Power supply

AC380V/50Hz, AC220V/50Hz

Compressed air source (MPa)

0.6

Note:the above mentioned specifications are just for reference only; the actual parameters may be adjusted in line with the improvements of product design. We can also customize machines according to client needs.


Related Equipments:

Pressure Testing Machine COJ-series, for inspecting the tire condition in initial and final inspection during retreading.
http://www.retreadingtech.com/info-859.html

Other Feautred Equipments:

 LLGH Curing Press   LLGH Curing Press  HFL Segment Curing Press  

 LLGH Curing Press

 Flat Pre-cured Tread Press

HFL Segment Curing Press 

  KTJ Inspection Spreader   CQJ Pressure Testing Machine   KGL Segment Press

 KTJ Inspection Spreader

 CQJ Pressure Testing Machine

 KGL Segment Press


 

Copyright(C) 2012 Leshan Yalun Mold Co.,Ltd All Rights Reserved