![]() |
Tire Builder YLT-series |
![]() |
![]() |
Function:
Tire Builder YLT-series are used to build the pre-cured tread on the buffed and prepared casing.
It is suitable for both cushion gum building and tread building.
Features:
Tread Cutter
The tread cutter is fixed on the frame, which consists of the articulated arm and jig saw. It is used to cut the extra flat tread to optimize length at the joint, which is convenient for operating.
Back Pressing Roller
Couple of back pressing rollers is mounted on the arch bar which connects with frame. The rollers and arch bar move symmetrically driven by pneumatic cylinders to exhaust the air between tread and casing and improve the tread-to-casing bond.
Tire Loader
To easily load and unload tires, this machine is equipped with tire loader, which is driven and controlled by pneumatic cylinder.
Driving Mechanism
The tire rotates together with the driving roller, which is driven by variable-speed motor. Usually, the slower speed is for building, and the higher speed is for pressing. The rotation with slower speed has two directions: forward and reverse. Switch by hand-control valve and start & stop by pedal.
Back Pressing Roller
Driving Mechanism
SPECIFICATIONS
Model |
YLT |
Tire size range |
6.50-16~~11.00-38 |
Total pressure(kn) |
4 |
Dimension (mm) |
1280*870*1550 |
Electric machine power (kw) |
2.2 |
Weight (t) |
0.5 |
Power supply |
AC380V,AC220V,50HZ |
Compressed air source(MPa) |
0.6 |