Current position:
Home Page >> Genaral Product List >> "Hot-cure" Curing Press
Two-piece Curing Press KGL-series
|
Two-piece Curing Press KGL-series |
Function:
KGL Two-piece curing press is used to cure/vulcanize bias OTR and giant OTR tyres with two-piece molds controlled by hydraulic system. The lower part of machine is flexible and stretchable, easy for loading and unloading tyres.
The outer mold applies optimal casting steel, bearing high internal pressure, and resisting deformation.
Based on different clients' technology needs and productivity, this model has some distinction in different parts, such as frame structure, control system, and pneumatic cylinder quantity, and so on.
Features:
1. Controlled by hydraulic system completely.
2. Replaceable mold in certain range.
3. Designed with frame structure, bear high internal pressure.
4. Both PLC and manual control available.
5. Multi- interlock, safe operation
Specifications:
Tire size range |
18.5-25~~23.5-25 |
Maximum inner pressure(MPa) |
<1.8 |
Steam pressure(MPa) |
<0.6 |
Dimension (mm) |
2850×2500×3250 |
Station pressure (Mpa) |
8 |
Electric machine power (kw) |
11 |
Weight (t) |
~1.2 |
Power supply |
AC380V,AC220V,50HZ |
Compressed air source (MPa) |
0.8 |
Relative Equipments:
Lifting Curing Press
http://www.retreadingtech.com/info-874.html
Uni-conical Segment Curing Press/Vulcanizing Machine
http://www.retreadingtech.com/info-873.html
KGFL segment curing press
http://www.retreadingtech.com/info-871.html
HFL Segment Curing Press/Vulcanizing Machine
http://www.retreadingtech.com/info-867.html
FL Two-piece Curing Press
http://www.retreadingtech.com/info-879.html
KGL frame automaticlly hyfraulic curing press
http://www.retreadingtech.com/info-877.html
Other Featured Products:
|
|
|
LLGH Curing Press |
Flat Pre-cured Tread Press |
HFL Segment Curing Press |
 |
 |
 |
KTJ Inspection Spreader |
CQJ Pressure Testing Machine |
KGFL Segment Press |
Copyright(C) 2012 Leshan Yalun Mold Co.,Ltd All Rights Reserved