中文版 english
Current position: Home Page >> Genaral Product List >> "Hot-cure" Curing Press

Partial Tire Vulcanizing Machine

 Partial Tire Vulcanizing machine/ Curing press

Function:
Partial Tire Vulcanizing machine/ Curing press is usuall used in repairing OTR tire (Off The Road Tire). After initial inspecition, if the holes found are too large to be repaired by just patches, usually they need to be patched and then repaired by partial vulcanizing machine/ curing press.

the partial tire vulcanizing machine in use  
 the partial tire vulcanizing machine in use
for repairing OTR tires

Specifications:
  FTL-J-1  FTL-J-2   FTL-J-3
 Tire Size Range  6.50-16 7.50-20 8.25-20
9.00-20 10.00-20
11.00-20 12.00-20   18.00-25 20.5-25 23.5-25
 Curing Time (min) 90~180  90~180   90~180  
 Airbag Pressure (Mpa) 0.8 0.8 0.8
Curing Temperature (C)   132~142   132~142  132~142 
 Steam Prssure (Mpa)  0.4  0.4 0.4 
 Eletric Power (kw) 9.5   20

Note:
the above mentioned specifications are just for reference only; the actual parameters may be adjusted in line with the improvements of product design. We can also customize machines according to client needs.

Our Other Featured Products

LLGH Curing Press Curing Chamber HFL Segment Curing Press

LLGH Curing Press

Curing Chamber

HFL Segment Curing Press

KGFL Segment Press

Flat Curing Press

Giant OTR Buffer

KGFL Segment Press

Flat Curing Press

Giant OTR Buffer


Copyright(C) 2012 Leshan Yalun Mold Co.,Ltd All Rights Reserved