中文版 english
Current position: Home Page >> Genaral Product List >> Inspection Machine

Tire Inspection Spreader KTJ-A for Truck & Bus Tires

 tire inspection spreader for truck & bus tire retreading / recapping


Function:

Tire inspection spreader KTJ-A is used to inspect the casing from inside to outside to evaluate the safety of the tire and make the decision whether the tire can be retreaded. Find and mark all visible and repairable defects on the acceptable tires. 
a worker using a truck/bus tire inspection spreader in a tire retreading factory   the tire inspection spreader spreads tire casing so the user can easily insptect the tire's condition

 
Why we need to inspect before retreading?

Tires are collected from various areas and each tire’s condition is different. To ensure the retreading quality of each tire, we must check the collected tires.
Tires are not acceptable if the following conditions happen:
Sidewall damage is beyond repair limits.
Bulges caused by separated or broken part of wires on the sidewall.
Wires of sidewall bruise breaks, contusion and blow outs, etc.
Bent, distorted, torn, burnt, broken, deformed and excessively senile beads.
Deep & rusty penetrated steel wire cuts which cause
separation.
Ply separation, excessive damage and extremely large orifice around crown area.


            Specification

 Model  KTJ-A  Note
 Dimensions(mm)  1530*900*1175  
 Gross Weight(kg)  500  
 Applicable Tire Size( Rim Size, Inch)  16-24"  Customiztion Available
 Compressed Air Resource Pressure(mpa)  0.8  
 Working Pressure (mpa)  0.65  
 Tire Lifting Function  Yes, Pneumatic  
 Electric Motor Power(kw)  0.37  
 Rotation:  Forward/Reverse/Inching  
 Lighting:  Handheld light  

How it works:
1. Load tire onto the inspection spreader. The tire will be lifted to the height of appropriate operation position by pneumatic cylinder. 
 2.The tire casing will be expanded to the reasonable width for easy inner inspection by the paw of inspection spreader.
 3.Rotate tire, find and mark the defects with light.


Copyright(C) 2012 Leshan Yalun Mold Co.,Ltd All Rights Reserved