Why we need to inspect before retreading?
Tires are collected from various areas and each tire’s condition is different. To ensure the retreading quality of each tire, we must check the collected tires.
Tires are not acceptable if the following conditions happen:
Sidewall damage is beyond repair limits.
Bulges caused by separated or broken part of wires on the sidewall.
Wires of sidewall bruise breaks, contusion and blow outs, etc.
Bent, distorted, torn, burnt, broken, deformed and excessively senile beads.
Deep & rusty penetrated steel wire cuts which cause separation.
Ply separation, excessive damage and extremely large orifice around crown area.
|Applicable Tire Size( Rim Size, Inch)||16-24"||Customiztion Available|
|Compressed Air Resource Pressure（mpa）||0.8|
|Working Pressure （mpa）||0.65|
|Tire Lifting Function||Yes, Pneumatic|
|Electric Motor Power(kw)||None/ Optional|
|Rotation:||Manual/ Electrical Controlled|
|Lighting:||Handheld light/ Fixed|